Canon ImageRunner iR8500 Series, Service Manual, Page: 462 / 1122

Chapter 9
9-58
2) Remove the front lower right cover of the cassette assembly as
instructed under "Removing the Vertical Path Roller 2."
3) Remove the two fixing screws [1] of the lifter motor (M16/M17), and
disconnect the connector [2]; then, detach the lifter motor [3].
F-9-89
9.10.3 Front Deck Pickup Assembly
9.10.3.1 Removing the Front Deck (right)
0007-1245
iR105i/iR105+ / iR9070 / iR85+ / iR8070
1) Slide out the deck.
2) Open the upper right cover and the lower right cover.
The pickup assembly cannot be removed unless the deck has been
removed (the lifter will get trapped).
3) Remove the mounting screw [1], and detach the connector cover [2];
then, disconnect the connector [3].
4) Remove the three mounting screws [4], and detach the pickup
assembly [5].
F-9-90
9.10.3.2 Removing the Pickup Assembly of the Front
Deck (left)
0007-1246
iR105i/iR105+ / iR9070 / iR85+ / iR8070
1) Slide out the deck (right, left).
2) Remove the two stoppers [2] from both left and right of the deck (left)
[1].
F-9-91
3) Disconnect the connector [3] from inside the machine.
F-9-92
4) Remove the two screws [4], and remove the two pickup assembly
fixing plate [5]; then, detach the cassette 2 pickup assembly [6].
F-9-93
When removing the fixing plate, be sure to support the pickup assembly
to avoid dropping it.
[1]
[2]
[2]
[3]
[3]
[5]
[4]
[4]
[3]
[2]
[1]
[1]
[2]
[3]
[6]
[5]
[4]
[5]
[4]