Canon ImageRunner iR8500 Series, Service Manual, Page: 895 / 1122

Chapter 17
17-51
17.3.9 SORTER
0007-0845
iR105i/iR105+ / iR9070 / iR85+ / iR8070
T-17-39
P020 pickup motor M1 (hereafter, analog
ports)
P021 feed motor M2
P022 delivery reversal motor M3
P023 post-separation sensor_DA S3
P024 post-separation sensor_TH S3
P025 read sensor DA S2
P026 read sensor TH S2
P027 delivery reversal sensor_DA S1
P028 delivery reversal sensor_TH S1
P029 not used
P030 not used
P031 not used
Address Bit Description Notation Remarks
P001 0 buffer motor A M2 during output, repeats
'0' and '1'
1 buffer motor B M2 during output, repeats
'0' and '1'
2 buffer motor A* M2 during output, repeats
'0' and '1'
3 buffer motor B* M2 during output, repeats
'0' and '1'
4 delivery motor A M3 during output, repeats
'0' and '1'
5 delivery motor B M3 during output, repeats
'0' and '1'
6 upper path switch-over solenoid SL2 0: ON
7 buffer path switch-over solenoid SL1 1: wrap, 0: release
P002 0 front aligning plate motor B M4 during output, repeats
'0' and '1'
1 front aligning plate motor A M4 during output, repeats
'0' and '1'
2 inlet motor brake M1 1: braking
3 buffer path rear paper sensor PI3 1: paper present
4 rear aligning plate motor B M5 during output, repeats
'0' and '1'
5 rear aligning plate motor A M5 during output, repeats
'0' and '1'
6 stack delivery motor clock M7 during output, repeats
'0' and '1'
7 inlet motor clock M1 during output, repeats
'0' and '1'
P003 0 EEPROM serial output - -
1 slave write serial output - -
2 EEPROM serial output - -
3 slave write serial output - -
4 EEPROM serial clock - -
5 EEPROM load signal - -
6 not used
7 not used
Address Bit Description Notation Remarks