
Chapter 9
9-71
F-9-161
4) Remove the E-ring [1] at the front of the roller shaft, and move the
bearing [2] toward the inside; then, detach the vertical path roller 2
[3].
F-9-162
9.10.17.4 Removing the Vertical Path Roller 2
0008-8183
/ iR85+ / iR8070
1) Slide out the deck (right) and the caste 3/4.
2) Remove the 3 screws [1], and detach the right lower front cover [2].
F-9-163
3) Disconnect the connector [1] and the screw [2]; then, detach the guide
plate [3].
F-9-164
4) Remove the E-ring [1] at the front of the roller shaft, and move the
bearing [2] toward the inside; then, detach the vertical path roller 2
[3].
F-9-165
9.10.18 Fixing Feeding Unit Releasing Lever Sensor
9.10.18.1 Removing the Fixing Feeding Unit Releasing
lever Sensor
0007-1408
iR105i/iR105+ / iR9070 / iR85+ / iR8070
1) Slide out the fixing feeding unit from the main body.
2) Detach the fixing feeding unit front cover.
3) Release the claw of the fixing feeding unit releasing lever sensor [1].
F-9-166
9.10.19 Feeding Belt
9.10.19.1 Removing the Feeding Belt
0007-1382
iR105i/iR105+ / iR9070 / iR85+ / iR8070
1) Slide out the fixing feeding unit from the main body.
2) Remove the fixing feeding unit front cover.
3) Disconnect the three connectors [1], and remove the screw [2]; then,
detach the harness guide [3].
[3]
[1]
[2]
[1]
[2]
[3]
[2]
[1]
[1]
[1]
[3]
[1]
[2]
[1]
[2]
[3]
[1]
Summary of Contents for ImageRunner iR8500 Series
