Canon ImageRunner iR8500 Series, Service Manual, Page: 933 / 1122

Chapter 17
17-89
<EXP-LED>
T-17-95
17.4.2 FEEDER
17.4.2.1 Feeder List
0008-4949
iR105i/iR105+ / iR9070
FEEDER >ADJUST
T-17-96
COPIER > ADJUST > EXP-LED
Sub-item Description Level
PRE-TR Use it to enter the output adjustment value for the pre-transfer exposure lamp.
1
<Setting range> 20 to 80
FEEDER >ADJUST
Sub-item Description Level
DOCST Use it to adjust the original stop position when the ADF is used (original tray pickup).
1
<Setting range> -30 to 30 (unit: 0.5 mm)
MEMO:
- A higher value decreases the leading edge margin.
- The data is retained by the ADF controller PCB.
<Using the Mode>
1) Place an original in the original tray.
2) Select the item, check the setting, and press the OK key.
3) Press the OK key. The original will be picked up.
4) Open the ADF, and check the original stop position.
5) Press the OK key. The original will be delivered.
DOCST-M Use it to adjust the original stop position when the ADF is used (manual feed tray).
1
<Setting range>
ޓ
-30 to 30 (unit: 0.5 mm)
Using the Mode
Same as in FEEDER> ADJUST> DOCST.
LA-SPEED Use it to adjust the original feed speed in ADF stream reading mode.
1
<Setting range> -30 to 30 (unit: 0.1%)
MEMO:
- A higher value increases the speed.
- The data is retained by the ADF controller PCB.
Feed
direction
Higher value
Lower value
Print image