Canon ImageRunner iR8500 Series, Service Manual, Page: 1015 / 1122

Chapter 17
17-171
BK-BD-12 Use it to set black band monthly remedial mode (for December).
2
<Setting value>
Same as for January.
SMTPTXPN Use it to change the number of the SMTP transmission port:
2
<Setting value>
0 to 65535 (in increments of 1)
Default: 25
After a change, be sure to re-boot the machine.
SMTPRXPN Use it to change the number of the SMTP reception port.
2
<Setting value>
0 to 65535 (in increments of 1)
Default: 25
After a change, be sure to re-boot the machine.
POP3PN Use it to change the number of the P0P3 reception port:
2
<Setting value>
0 to 65535 (in increments of 1)
Default: 110
After a change, be sure to re-boot the machine.
RUI-DSP Setting whether to display a copy screen for RUI (Option switch conforming
to the Disability Law)
2
<Setting value>
0: Do not display [Default]
1: Display
TRY-CHG Use it to change the control mechanism used to switch over trays when one
becomes full.
2
STS-PORT Turning the TOT synchronous command communication port ON or OFF
The port for Inquiry/Response (synchronous) command communication in
TUIF over TCP/IP is turned ON or OFF.
2
<Setting value>
0: OFF [Default]
1: ON
CMD-PORT Turning the TOT asynchronous status communication port ON or OFF
The port for asynchronous status communication in TUIF over TCP/IP is
turned ON or OFF.
2
<Setting value>
0: OFF [Default]
1: ON
VBK-TBL changes the Vback environment control mechanism.
2
<Setting value>
0: default
1: new Vback control
NS-CMD5 Limiting the use of CRAM-MD5 in SMTP authentication
This is set to limit the use of CRAM-MD5 in SMTP authentication
2
<Setting value>
0: Dependent on the SMTP server [Default]
1: Do not use
NS-GSAPI Limiting the use of GSSAPI in SMTP authentication
This is set to limit the use of GSSAPI in SMTP authentication.
2
<Setting value>
0: Dependent on the SMTP server [Default]
1: Do not use
NS-NTLM Limiting the use of NTLM in SMTP authentication
This is set to limit the use of NTLM in SMTP authentication.
2
<Setting value>
0: Dependent on the SMTP server [Default]
1: Do not use
NS-PLNWS Limiting the use of PLAIN and LOGIN for SMTP authentication in an
environment of communication packet encryption
This is set to limit the use of PLAIN and LOGIN for SMTP authentication in
an environment where communication packets are encrypted
2
<Setting value>
0: Dependent on the SMTP server [Default]
1: Do not use
NS-PLN Limiting the use of PLAIN and LOGIN for SMTP authentication in an
environment
This is set to limit the use of PLAIN and LOGIN for SMTP authentication in
an environment where communication packets are not encrypted.
2
<Setting value>
0: Dependent on the SMTP server [Default]
1: Do not use
COPIER > OPTION > BODY
Sub-item Description Level