Canon ImageRunner iR8500 Series, Service Manual, Page: 67 / 1122

Chapter 1
1-31
T-1-16
1.2.3.10 Extension Mode Items
0006-9429
iR105i/iR105+ / iR9070 / iR8070
T-1-17
[1] Counter Check key * [10] Keypad
[2] Image contrast dial [11] Operation/Memory lamp
[3] Power Save key [12] ID key
[4] Control panel power switch [13] Interrupt key
[5] Stop key [14] User Mode key
[6] Main power lamp [15] Help key
[7] Start key [16] Reset key
[8] Clear key [17] Touch panel display
[9] Error lamp [18] Clip dent
* Indicates the readings of counters on the touch panel display.
Item Description
Page separation Use it to copy left and right pages of an open book on
separate sheets by a single operation.
Note: only used book mode
Cover/Interleaf Use it to use sheets different from those used for the body
for a cover, back cover, interleaf, or chapter leaf. Copies
may also be made on sheets for insertion.
Reduced Page Composition Use it for automatic reduction of 2, 4, or 8 originals, or a
double-sided original or a book original for printing on a
singe sheet of paper (singe-/double-sided).
Shift Use it to shift the entire image of an original to any point
(center, corner) for printing.
Book Making Use it to print single-sided or double-sided originals when
producing a booklet.
Transparency Interleaf Use it to insert a sheet of paper between transparencies
used in manual mode. The sheets may also be used to copy
the original.
Enlarged Image Composition Use it for automatic enlargement of a single original after
dividing it into 2 or 4 parts for copying on paper of a
specified size.
Bind Margin Use it to create a margin of a specified size on the edge of
the copy as binding margin (left, right, top, bottom).
Mixed Sizes Use it when using originals of different sizes in an ADF
for printing according to each size. The originals must,
however, be of the same length on one side, e.g., A3 and
A4 or b4 and B5.
Continuous Reading Use it for continuous reading of different sets of originals
for printing as a single set.
Frame Erase Use it to erase the shadow, frame, or image of holes from
copies.
Negative/Positive Reversal Use it to reverse the black and white areas of the original
for printing.
Image Repeat Use it to repeat a single image on copies for as many times
as needed (until the entire page is covered) in vertical or
horizontal direction.
Mirror Image Use it to print a mirror image of an image on the original.
Sharpness Use it to emphasize the contrast of the image for a sharper
impression.