Canon ImageRunner iR8500 Series, Service Manual, Page: 828 / 1122

Chapter 16
16-32
[E602-XXYY]
T-16-8
[HDD formatting]
00 05 Symptom absent
00 06 The system software of the sub CPU does
not exist. 1. Start up in safe mode, and execute full formatting using
the SST and re-install the system software (System,
Language, RUI); then, turn off and then back on the main
power.
2. If the symptom still exists after the foregoing, suspect
a fault on the HDD, and replace the HDD and re-install
the system software once again.
00 07 The IC profile does not exist. 1. Start up in safe mode, and execute full formatting using
the SST and re-install the system software (System,
Language, RUI); then, turn off and then on the main
power.
2. If the symptom still exits after the foregoing, suspect a
fault on the HDD, and replace the HDD and re-install the
system software.
XX YY
XX CHK-
TYPE Partition in
question Description 01 02 03 11, 21 13, 25 10, 12,
14, 22,
23, 24
At startup During routine operation
Reme-dy Reme-
dy
Reme-
dy Reme-dy Reme-dy Reme-
dy
1 1 DOSDEV General data
storage area *1 *5 *9 *10 *11 *12
2 1 FSTDEV Image data
storage area
(e.g., Box) *1 *5 *9 *10 *11 *12
3 1 DOSDEV2 Image
thumbnail
display data
area (e.g., Box) *1 *5 *9 *10 *11 *12
4 1 FSTPDEV Image data
storage area
(e.g., Box) *1 *5 *9 *10 *11 *12
5 2 DOSDEV3 General file
storage area
(user settings,
logs, PDL
spool, image
data control
info) *1 *5 *9 *10 *11 *12
6 3 PDLDEV PDL-related
file storage
area (font,
registered
form, ICC
profile, color
correction info
file for PDL
function) *1 *5 *9 *10 *11 *12
7 4 DOSDEV4 Firmware
storage area
(address book,
filter) *2 *6 *9 *10 *11 *12
8 4 BOOTDEV Firmware
storage area
(System,
Language,
RUI) *3 *8 *9 *10 *11 *12
9 5 DOSDEV5 For future
expansion *1 *5 *9 *10 *11 *12
FF 0 Not identified Entire HDD
(check on
faulty sector
and recovery) *4 *7 *9 *10 *11 *12
XX YY Description Remedy