Canon ImageRunner iR8500 Series, Service Manual, Page: 978 / 1122

Chapter 17
17-134
<USER>
T-17-174
SVMD-ENT Switching how to enter service mode
2
<Setting value>
0: [User mode key] -> Simultaneous press of [2] and [*]-> [User mode]
(Default)
1: [User mode key] -> Simultaneous press of [4] and [9]-> [User mode]
DA-CNCT Reserved for future 2
CHNG-STS indicates the ToT status component number.
2
sets the port number for the status connection when TUIF over TTCP/IP is in
use.
setting range: 1-65535
setting: 20010
CHNG-CMD Setting of ToT command connection port number
2
sets the port number for the status connection when TUIF over TTCP/IP is in
use.
setting range: 1-65535
setting: 20010
MEAP-DSP Turning screen transition from MEAP to Native ON or OFF
2
<Setting value>
0: OFF (Transition to the Native screen) [Default]
1: ON (No transition to the Native screen)
ANIM-SW Turn MEAP application error/jam screen display ON or OFF
2
<Setting value>
0: OFF (Display warning screen) [Default]
1: ON (Do not display warning screen)
MEAP-SSL Setting the MEAP HTTPS port
2
<Setting value>
0 to 65535 (same as the setting of another network port system) [Default:
8443]
COPIER > OPTION >USER
Sub-item Description Level
COPY-LIM Changing the upper limit of copy count
1
<Setting value>
1 to 9999 [Default: 9999]
SLEEP Turning the sleep function ON or OFF
1
<Setting value>
0: OFF
1: ON [Default]
The sleep function is set with Timer in User Mode.
WEB-DISP Use it to turn ON/OFF the fixing web length message.
1
MEMO:
0: OFF (do not issued; but issued only when in service mode)
<Setting value>
0: OFF (do not issue; default)
1: ON (issue)
W-TONER Use it to turn ON/OFF the waste toner case full warning message.
1
MEMO:
0: OFF (do not issue; but issue only when in service mode)
<Setting value>
0: OFF (do not issue; default)
1: ON (issue)
COUNTER1 Setting Software counter 1 on the User mode screen
1
<Setting value>
101: Total 1
[Value at shipping / Value after RAM clearance = 101 -> Cannot be changed]
COUNTER2to6 Setting Software counters 2 to 6 on the User mode screen
1
<Setting value>
0 to 999
CONTROL Limiting the user of a control card for a PDL job
1
<Setting value>
0: Do not use [Default]
1: Use
COPIER > OPTION > BODY
Sub-item Description Level