Canon ImageRunner iR8500 Series, Service Manual, Page: 143 / 1122

Chapter 2
2-41
Go through the following steps only if Inch-configured paper is not
going to be used.
1) Press the releasing buttons of cassettes 3 and 4, and slide out the
cassettes to remove the packing material.
2) Set the side guide plate [1] of cassettes 3 and 4 into the hole (A4/A3)
identified by the marking M.
Fit the non-Inch tab [2] that comes with the machine into the hole
identified by the following marking, making sure that it will not be
pushed up from inside the cassette:
A:STMT-R
H:LTR-R
F-2-173
2.2.31 Cassette
0007-2402
/ iR8070
Go through the following steps only if Inch-configured paper is not
going to be used.
1) Press the releasing buttons of cassettes 3 and 4, and slide out the
cassettes to remove the packing material.
2) Set the side guide plate [1] of cassettes 3 and 4 into the hole (A4/A3)
identified by the marking M.
Fit the non-Inch tab [2] that comes with the machine into the hole
identified by the following marking, making sure that it will not be
pushed up from inside the cassette:
A:STMT-R
H:LTR-R
F-2-174
2.2.32 Index Paper Attachment
0007-6700
iR105i/iR105+ / iR9070
1) Decide on either cassette 3 or 4 for use for index paper.
Press the releasing button for the cassette, and slide it out to the front.
Match the 2 one-touch supports [1] against the holes [2] in the cassette;
then, push in the pins to fix them in place.
2) Place the index paper attachment [3] by matching its holes against the
one-touch supports [1].
3) Fit the base sheet [6] in the cassette.
Slid out the cassette.
F-2-175
2.2.33 Index Paper Attachment
0007-3511
/ iR85+
1) Decide on either cassette 3 or 4 for use for index paper.
Press the releasing button for the cassette, and slide it out to the front.
Match the 2 one-touch supports [1] against the holes [2] in the cassette;
then, push in the pins to fix them in place.
2) Place the index paper attachment [3] by matching its holes against the
one-touch supports [1].
3) Fit the base sheet [6] in the cassette.
Slid out the cassette.
F-2-176
2.2.34 Index Paper Attachment
0007-2404
/ iR8070
1) Decide on either cassette 3 or 4 for use for index paper.
Press the releasing button for the cassette, and slide it out to the front.
Match the 2 one-touch supports [1] against the holes [2] in the cassette;
then, push in the pins to fix them in place.
2) Place the index paper attachment [3] by matching its holes against the
one-touch supports [1].
3) Fit the base sheet [6] in the cassette.
A
H
[2]
[1]
A
H
[2]
[1]
[2]
[1]
[5]
[4]
[3]
[6]
[2]
[1]
[5]
[4]
[3]
[6]