Canon ImageRunner iR8500 Series, Service Manual, Page: 225 / 1122

Chapter 4
4-15
* When the machine starts up for the first time after its HDD has been formatted, it may take longer than usual to complete the startup session.
[Remedy]
T-4-9
YY Description Remedy
*1 01 The ongoing write operation has been
suspended (at startup). 1. Set '0' to TYPE-TYPE, and execute HDD-
CHECK (50 to 50 min). Thereafter, turn off and
then back on the power.
2. If the symptom still exists after the foregoing,
type in TYPE-TYPE for the partition in question,
and execute HDD-CLEAR. Thereafter, turn off
and then back on the main switch.
*2 01 The ongoing operation has been
suspended (at startup). 1. If possible, ask the user to back up the address
book data using the RUI.
2. Set '0' to TYPE-TYPE, and execute HDD-
CHECK (40 to 50 min). Thereafter, turn off and
then back on the power.
3. If the symptom still exists after the foregoing,
start download mode, and execute full formatting
using the SST and re-install the system software
(System, Language, RUI). Thereafter, turn off and
then back on the main power.
*3 01 The ongoing write operation has been
suspended (at startup). To run a recovery session for the boot partition,
you will have to use safe mode in combination with
the SST.
1. Set '0' for TYPE-TYPE, and execute HDD-
CHECK (40 to 50 min). Thereafter, turn off and the
back on the power.
2. If the symptom still exits after the foregoing,
start download mode, and execute full formatting
using the SST, and re-install the system software
(System, Language, RUI). Thereafter, turn off and
then back on the power.
*4 01 The ongoing write operation has been
suspended (at startup). 1. Set '0' for TYPE-TYPE, and execute HDD-
CHECK (40 to 50 min). Thereafter, turn off and
then back on the power.
2. If the symptom still exits after the foregoing,
execute HDD-CLEAR using TYPE-TYPE=1, 2, 3,
5. Thereafter, turn off and then back on the power.
*5 02 A file system error has occurred. 1. Type in TYPE-TYPE of the partition in
question, and execute HDD-CLEAR. Thereafter,
turn off and then back on the main switch.
2. If the system still exits after the foregoing,
suspect a fault on the HDD, and replace the HDD
and re-install the system software.
*6 02 There is a file system error. The system software is designed so that the
information in this partition (e.g., address book,
filter) is not deleted inadvertently; i.e., you will not
the able to execute HDD-CLEAR from service
mode.
1. If possible, ask the user to back up the address
book data using the RUI.
2. From service mode, start download mode; then,
execute full formatting using the SST and re-install
the system software (System, Language, RUI).
Thereafter, turn off and the back on the main
power.
*7 02 A file system error has occurred. This type of error is highly rare.
1. Using TYPE-TYPE=1, 2, 3, 5, execute HDD-
CLEAR. Thereafter, turn off and then back on the
power.
2. If the symptom still exits after the foregoing,
suspect a fault on the HDD, and replace the HDD
and re-install the system software.
*8 02 A file system error has occurred. The system software is designed so that a recovery
session will not run for the boot partition unless
you use safe mode in combination with the SST.
1. Start up in safe mode, and execute full
formatting using the SST and re-install the system
software (System, Language, RUI). Thereafter,
turn off and then on the main power.
2. If the symptom still exits after the foregoing,
suspect a fault on the HDD, and replace the HDD
and re-install the system software.