Canon ImageRunner iR8500 Series, Service Manual, Page: 296 / 1122

Chapter 5
5-44
F-5-133
4) Disconnect the connector [1] (1 pc. each), and detach the original size
1/2 [2].
F-5-134
5.4.13.2 Removing the Original Size Sensor 1/2
0008-8020
1) Remove the copyboard glass.
2) Move the No. 1 mirror base to the right edge.
3) Remove the 2 screws [1], and disconnect the connector [2]; then,
detach the original size sensor unit (front) [3].
F-5-135
4) Disconnect the connector [1] (1 pc. each), and detach the original size
sensor 1/2 [2].
F-5-136
5.4.13.3 Removing the Original Size Sensor
0008-8063
/ iR8070
1) Remove the copyboard glass.
2) Move the No. 1 mirror base to the left end.
3) Remove the screw [1], and disconnect the connector [2]; then, free the
cable from the cable clamp [3], and detach the original sensor unit
[4].
F-5-137
When removing the original sensor, take care not to damage it against
the cable [5].
5.4.13.4 Removing the Original Size Sensor 3/4
0007-2547
iR105i/iR105+ / iR9070
1) Remove the copyboard glass.
2) Move the No. 1 mirror base to the left edge.
3) Remove the screw, and disconnect the connector [2]; then, detach the
original size sensor unit (rear) [3].
[1] [3]
[2]
[2] [2]
[1]
[1] [3] [2]
[2]
[2]
[1]
[1]
[4]
[2]
[3] [5]