Canon ImageRunner iR8500 Series, Service Manual, Page: 1035 / 1122

Chapter 17
17-191
<USER>
T-17-195
ANIM-SW Turn MEAP application error/jam screen display ON or OFF
2
<Setting value>
0: OFF (Display warning screen) [Default]
1: ON (Do not display warning screen)
MEAP-SSL Setting the MEAP HTTPS port
2
<Setting value>
0 to 65535 (same as the setting of another network port system) [Default:
8443]
COPIER > OPTION >USER
Sub-item Description Level
COPY-LIM Changing the upper limit of copy count
1
<Setting value>
1 to 9999 [Default: 9999]
SLEEP Turning the sleep function ON or OFF
1
<Setting value>
0: OFF
1: ON [Default]
The sleep function is set with Timer in User Mode.
WEB-DISP Use it to turn ON/OFF the fixing web length message.
1
MEMO:
0: OFF (do not issued; but issued only when in service mode)
<Setting value>
0: OFF (do not issue; default)
1: ON (issue)
W-TONER Use it to turn ON/OFF the waste toner case full warning message.
1
MEMO:
0: OFF (do not issue; but issue only when in service mode)
<Setting value>
0: OFF (do not issue; default)
1: ON (issue)
COUNTER1 Setting Software counter 1 on the User mode screen
1
<Setting value>
101: Total 1
[Value at shipping / Value after RAM clearance = 101 -> Cannot be changed]
COUNTER2to6 Setting Software counters 2 to 6 on the User mode screen
1
<Setting value>
0 to 999
CONTROL Limiting the user of a control card for a PDL job
1
<Setting value>
0: Do not use [Default]
1: Use
B4-L-CNT Setting whether to count B4 as the large size or the small size on Software
counters 1 to 6
1
<Setting value>
0: Small size [Default]
1: Large size
COPY-JOB Prohibiting copy job reservation when a card reader and a coin robot are used
1
<Setting value>
0: Copy job reserved [Default]
1: Copy job not reserved
TAB-ROT If the image is a PDL landscape in PDL, use it to specify whether to rotate it 180
deg.
1
<Setting value>
0: do not rotate
1: rotate
PR-PSESW Setting whether or not to display the print pause function switch
1
<Setting value>
0: No print pause function [Default]
The user screen does not display the print pause function. (Conventional
specification)
1: Print pause function [Default]
The user screen does not display the print output stop and restart settings.
COPIER > OPTION > BODY
Sub-item Description Level