Canon ImageRunner iR8500 Series, Service Manual, Page: 503 / 1122

Chapter 10
10-17
F-10-19
10.3.1.15 Power Save Mode
0008-9066
/ iR85+ / iR8070
When the Power Save mode key is pressed in the control panel, the control temperature in STBY is made lower than normal to reduce power consumption.
Figure shows the sequence of operation used in power save mode.
F-10-20
Main heater (H1)
Sub heater (H2)
25% save rate
50% save rate
200ºC
195ºC
170ºC
105ºC
STBY SLEEP STBY WMUP
Power save mode
set in user mode
Power Save
key ON
Power Save
key OFF
Temperature control
according to selected save rate
WMUPR omitted
Returns to normal temperature control
when Power Save key is turned OFF
200V: 185ºC
208V/230V: 195ºC 200V: 190ºC
208V/230V: 200ºC
200V: controlled to 190ºC
208V/230V: controlled to 200ºC 200V: controlled to 190ºC
208V/230V: controlled to 200ºC
Main heater
(H1)
Sub heater
(H2)
Rage of saving
of 25%
Rate of saving
of 50%
198˚C
195˚C
170˚C
105˚C
STBY SLEEP STBY WMUP
Power save
mode selected
in user mode
Power save
key ON
Power save
key OFF 195˚C 198˚C
Controlled
according to
rate of saving
Controlled to 198˚C
Controlled to 198˚C
Omits WMUPR
Returns to normal temperature
control in response to a second
press on the Power Save key.