Canon ImageRunner iR8500 Series, Service Manual, Page: 959 / 1122

Chapter 17
17-115
<PART-CHK>
T-17-146
T-17-147
Start START
Clear CLEAR
PIN ID
Help ?
Counter Check BILL
COPIER > FUNCTION > PART-CHK
Sub-item Description Level
CL Specifying a clutch to check its operation
(Range: 1 to 21)
1
<Operating procedure>
1) Select this item.
2) Enter the code of the clutch from the ten-key pad.
3) Press the OK key.
4) Press CL-ON to check its operation.
CL-ON Starting the clutch operation check
1
<Operating procedure>
1) Select this item and press the OK key to repeat ON and OFF in the following
pattern:
0.5-second ON ->10-second OFF -> 0.5-second ON -> 10-second OFF -> 0.5-
second ON -> OFF
MTR Specifying a motor to check its operation
(Range: 1 to 11)
1
<Operating procedure>
1) Select this item.
2) Enter the code of the motor from the ten-key pad.
3) Press the OK key.
4) Press MTR-ON to check its operation.
MTR-ON Starting the motor operation check
1
<Operating procedure>
1) Select the item, and press the OK key.
- 20 sec ON -> OFF
- for hopper and duplex horizontal registration motor, 10 sec ON -> OFF
- for shift tray motor, stops at front/rear HP
SL Specifying a solenoid to check its operation
(Range: 1 to 13)
1
<Operating procedure>
1) Select this item.
2) Enter the code of the solenoid from the ten-key pad.
3) Press the OK key.
4) Press SOL-ON to check its operation.
SL-ON Starting the solenoid operation check
1
<Operating procedure>
1) Select this item and press the OK key to repeat ON and OFF in the following
pattern:
0.5-second ON -> 5-second OFF -> 0.5-second ON -> 5-second OFF -> 0.5-
second ON -> OFF
Code Name Code Name
1 manual feed tray pickup clutch (CL7) 12 lower feeder right clutch (CL17)
2 cassette 3 pickup clutch (CL12) 13 deck (left) feed clutch (CL19)
3 vertical path 3 clutch (CL13) 14 delivery speed switch-over clutch (CL21)
4 cassette 4 pickup clutch (CL14) 15 registration brake clutch (CL3)
5 vertical path 4 clutch (CL15) 16 manual feed tray feed clutch (CL18)
6 deck (right) pickup clutch (CL10) 17 inside hopper magnet roller drive clutch (CL1)
7 vertical path 1 clutch (CL8) 18 developing sleeve clutch (CL4)
8 deck (left) pickup clutch (CL11) 19 registration clutch (CL2)
9 vertical path 2 clutch (CL9) 20 side paper deck feed clutch (CL101)
10 pre-registration clutch (CL5) 21 side paper deck pickup clutch (CL102)
11 lower feeder middle cutch (CL6)
Key Screen Display