Canon ImageRunner iR8500 Series, Service Manual, Page: 968 / 1122

Chapter 17
17-124
<CLEAR>
T-17-166
COPIER > FUNCTION > CLEAR
Sub-item Description Level
ERR Clearing an error code
(Object error code: E000/E001/E002/E003)
1
<Operating procedure>
1) Select this item and press the OK key.
2) Turn the main power switch OFF and ON.
DC-CON Clearing RAM on the DC controller circuit board
The RAM is cleared when the main power switch is turned OFF and ON.
1
<Operating procedure>
1) Select COPIER>FUNCTION>MISC-P>P-PRINT to print out the contents of
the service mode.
2) Select this item and press the OK key.
3) Turn the main power switch OFF and ON.
4) Enter the P-PRINT output data as required.
R-CON Clearing RAM on the reader controller circuit board
The RAM is cleared when the main power switch is turned OFF and ON.
1
<Operating procedure>
1) Select COPIER>FUNCTION>MISC-P>P-PRINT to print out the contents of
the service mode.
2) Select this item and press the OK key.
3) Turn the main power switch OFF and ON.
4) Enter the P-PRINT output data as required.
JAM-HIST Clearing the jam history
The jam history is cleared when the OK key is pressed.
1
<Operating procedure>
1) Select this item and press the OK key.
ERR-HIST Clearing the error history
The error history is cleared when the OK key is pressed.
1
<Operating procedure>
1) Select this item and press the OK key.
PWD-CLR Clearing the password of the system administrator set in user mode
The password is cleared when the OK key is pressed.
1
<Operating procedure>
1) Select this item and press the OK key.
ADRS-BK Clearing the address book on the reader controller circuit board
The address book is cleared when the main power switch is turned OFF and ON.
1
<Operating procedure>
1) Select this item and press the OK key.
2) Turn the main power switch OFF and ON.
CNT-MCON Clearing the service counter incremented by the main controller circuit board
The password is cleared when the OK key is pressed.
1
<Operating procedure>
1) Select this item and press the OK key.
CNT-DCON Clearing a service counter incremented by the DC controller circuit board
The password is cleared when the OK key is pressed.
This applies to SORT, FIN-STPR, SADDLE, and SDL-STPL under
COPIER>COUNTER>DRBL-2.
1
<Operating procedure>
1) Select this item and press the OK key.
MMI Clearing the following settings in User mode
- Backup data (user-defined values) for copy operations
- Backup data (user-defined values) of common settings
- Various backup data (user-defined values), excluding fax
The settings are cleared when the main power switch is turned OFF and ON.
1
<Operating procedure>
1) Select this item and press the OK key.
2) Turn the main power switch OFF and ON.
MN-CON Clearing RAM on the main controller circuit board
The RAM is cleared when the main power switch is turned OFF and ON.
1
<Operating procedure>
1) Select COPIER>FUNCTION>MISC-P>P-PRINT to print the contents of the
service mode.
2) Select this item and press the OK key.
3) Turn the main power switch OFF and ON.
4) Enter the P-PRINT output data as required.