Canon ImageRunner iR8500 Series, Service Manual, Page: 721 / 1122

Chapter 14
14-67
F-14-162
14.8.32 Position for the Cassette 3/4 Pickup
Solenoid (SL9/10)
0008-8424
/ iR85+ / iR8070
Adjust the position using the screws [1] so that when [A] and [B] in the
following figure are operated and when the plunger of the pickup roller
releasing solenoid is pulled, the distance from the bottom of each pickup
unit to the bottom edge of the bushing of the roller support plate is 36
±0.5 mm.
F-14-163
14.8.33 Position of the Side Paper Deck Pickup
Roller Releasing Solenoid
0007-0648
iR105i/iR105+ / iR9070
Before removing the deck pickup roller releasing solenoid [1] from the
support plate, make mental notes of the positions of the 2 fixing screws
[2] of the solenoid with reference to the index on the support plate. (Or,
mark the position of the solenoid on the support plate with a scriber.)
If you are replacing the solenoid on its own, you must secure it in its
initial position.
F-14-164
14.8.34 Position of the Side Paper Deck Pickup
Roller Releasing Solenoid
0008-8426
/ iR85+ / iR8070
Before removing the deck pickup roller releasing solenoid [1], be sure
to take note of the positions of the two fixing screws [2] of the solenoid
with reference to the scale on the support plate. Or, mark the position for
the solenoid itself on the support plate using a scriber.
If you are replacing the solenoid on its own, be sure to secure the
solenoid exactly where the old solenoid was found.
F-14-165
14.8.35 Fitting the Side Guide Timing Belt of the
Manual Feed Tray Assembly
0007-0649
iR105i/iR105+ / iR9070
Butt the rack plate [1] of the manual feed tray against section A (open
state).
Move the slide volume [2] in the direction of B, and fit the timing belt
[3] to the pulley [4].
F-14-166
14.8.36 Attaching the Timing Belt for the Manual
Feed Tray Assembly Side Guide
0008-8428
/ iR85+ / iR8070
[1] [2]
[1]
[2]
A
View from A
35.5±0.5mm
[3]
[A]
[B]
[A]
[B]
Z
View from Z
36±0.5mm
[1]
[2]
[1]
[2]
[1]
[4]
[3]
[1]
[4]
A
B
[2]