Canon imageCLASS 1100, Reference Manual

Page: 90 / 260

Setting the Timer 2-34
2
Cus
to
mis
ing S
etti
ng
s t
o Y
ou
r
Need
s
Changing the Auto Energy Saver Time
If the copier is left untouched for a specified period of time after a Copy job or a key input, the
copier will automatically lower the temperature of the fixing unit and go into the Energy Saver
mode. This is called the Auto Energy Saver function.
NOTE
•
The default setting is “30 min”..
1
Display the required screen as follows:
Press (Additional Functions)
→
[Timer Settings]
→
[Auto Energy Saver Time]
2
Enter the desired time period using [-] and [+]; then press [OK].
The Auto Energy Saver Time can be set to 0 min, 1 min, 2 min, 5 min, 10 min, 20 min, 30 min, or 1 to 8
hours (1-hour increments).
When “0” is selected, the Auto Energy Saver function is not specified.
3
Press [Done].