Canon imageCLASS 1100, Reference Manual

Page: 163 / 260

Touch Panel Display Messages 4-29
4
T
rou
b
le
s
h
ooti
n
g
Touch Panel Display Messages
This section explains the various messages that appear on the touch panel display.
Error Messages
Self-diagnostic (error) messages appear on the touch panel display at the following times:
• When copies cannot be made because of some operational error.
• When copies cannot be made because the conditions necessary for copying are not met.
• When you need to make a decision or take some action during scanning or copying.
Perform the necessary procedures as indicated by the messages. The following describes some
of the messages that require further explanation.
NOTE
•
The messages are listed in alphabetical order.
Add black toner.
Cause : The copier has run out of toner of the colour indicated on the touch panel display.
Remedy : Add toner of the colour indicated on the touch panel display according to the
procedure described in ‘Adding Toner’ (see p. 3-12).
Add fixing oil.
Cause : There is little fixing oil remaining.
Remedy : Follow the procedure given under ‘Refilling Fixing Oil’, on p. 3-19.
Adjusting... Please wait.
Cause : The copier is making automatic adjustments.
Remedy : Wait until the automatic adjustments are completed, and the Copy job will resume.