Cabletron Systems MMAC-Plus 9F116-01, User Manual, Page: 89 / 420

Configuring Frame Relay 6-7
Figure 6-2 Bandwidth Allocation Group Menu
[A],[A],[H]
from Main Menu
Pressing
[N]
will display Page 2, which contains parameters for groups 5–8. Page 3
contains groups 9–12, and Page 4 contains groups 13–16.
Bandwidth Allocation Group Parameters
Explanations of the parameters follow the table.
Group "n" Percentage
is a percentage of bandwidth that will be dedicated to traffic in a group if necessary.
If the traffic does not require the full allocation, unused bandwidth will be available to
other groups.
The total percentage assigned to all sixteen groups can be greater than 100%. This
allows allocating 100% to, for example, four or five groups that will be used for a par-
ticular type of traffic, and 100% to another few groups, and so on. Since usage obvi-
ously cannot exceed 100%, any allocation of greater than 100% will be treated as
100%, with the percentages assigned to the affected groups treated as relative per-
centages. For example, assume that Group 1 is assigned 60% and Group 2 70%, and
Table 6-1 Bandwidth Allocation Group Parameters
Parameter Valid Values Default Value
Dynamic Optimizati on
is not currently supported
Group "n" Percentage 0–100 100
Group "n" Excess Pri ority 0–16 1
Group "n" Use Excess Burst Y/ N N
: Nod e Name= node_xyz
Bandw id th A llocation Group (screen 1 of 4)
A Dynamic Optimization N
B Group 1 Percentage 0
C Group 1 Excess Priority 1
D Group 1 Use Excess Burst Y
E Group 2 Percentage 0
F Group 2 Excess Priority 1
G Group 2 Use Excess Burst Y
H Group 3 Percentage 0
I Group 3 Excess Priority 1
J Group 3 Use Excess Burst Y
K Group 4 Percentage 0
L Group 4 Excess Priority 1
M Group 4 Use Excess Burst Y
N Page 2
Option: