Cabletron Systems MMAC-Plus 9F116-01, User Manual, Page: 66 / 420

4-8 FRX/FRM 3. 3 User G uide, Rev 04
Figure 4-5 LP Configuration Menu for FRX6000
[A],[B],[B] from Main Menu
On a new record for an RLP that is not installed,
Status
and
Memory Con-
figuration
will be blank until the record is saved.
Although nine protocol entries are shown, a 4MB RLP supports a
maximum of five.
To add or remove a protocol:
1. Press the letter corresponding to the protocol number. The protocol in the
Configured
column will change to the next one in the list shown in Table 4-3 on
page 4-9.
2. Reboot the node as follows:
Rebooting will clear all connections on this node. However, the
node must be rebooted to implement the change.
a. Press
[F10]
.
b. When asked:
Reboot the Node?
, press
[Y]
.
c. Type
restart [Enter]
.
Nod e Name=nod exyz
Line Process or Con figu ration
* LP: 1
* S tatus: I nstalled
* Memory Configuration: 8 Meg
A LP Typ e: R LP
B Line I nterface C ard 1: V.35
C Line I nterface C ard 2: RS -232
C onfigured Loaded
D Protocol 1: X .25 X.25
E Protocol 2: FRL FR L
F Protocol 3: A sync Asyn c
G Protocol 4: S DLC SDLC
H Protocol 5: I P IP
I Protocol 6: N one
J Protocol 7: N one
K Protocol 8: N one
L Protocol 9: N one
Option: