Cabletron Systems MMAC-Plus 9F116-01, User Manual, Page: 109 / 420

Configuring Frame Relay 6-27
Default Window Size
will be assigned to an incoming call setup packet if the packet does not include a
window size.
Maximum Throughput Class
specifies the default throughput class that will be inserted into a Call Request packet
if Throughput Class Negotiation is not enabled or if a throughput class is not requested
in the Call Request. This value should not be higher than the line speed specified for
the physical port.
Valid values (in bits per second) are:
75 150 300 600 1200 2400
4800 9600 19.2K 48K 64K
Default Calling Address
will be inserted into an incoming Call Request packet if the packet does not contain a
calling address.
T20 Restart Timer
will be started when the logical DTE issues a Restart Request, and stopped (and reset)
when a Restart Confirmation or Restart Indication is received. If the timer expires, the
DTE should retransmit the Restart Request.
T21 Incoming Call Timer
will be started when the logical DTE issues a Call Request packet, and stopped (and
reset) when a Call Connected, Clear Indication, or Incoming Call is received. If the
timer expires, the DTE should send a Clear Request.
T22 Reset Timer
will be started when the logical DTE issues a Reset Request, and stopped (and reset)
when a Reset Confirmation or Reset Indication is received. If the timer expires, the
DTE should retransmit the Reset Request or a Clear Request.
T23 Clear Timer
will be started when the logical DTE issues a Clear Request, and stopped (and reset)
when a Clear Confirmation or Clear Indication is received. If the timer expires, the
DTE should retransmit the Clear Request.
DTE Restart Retry Count
is the number of times a Restart Request from the logical DTE will be transmitted.
(The DTE will stop issuing the request on receipt of a Restart Confirmation or Restart
Indication.) If the
Restart Retry Count
expires, restart and recovery procedures should
be initiated.
DTE Reset Retry Count
is the number of times a Reset Request from the logical DTE will be transmitted. (The
DTE will stop issuing the request on receipt of a Reset Confirmation, Reset Indication,
or Clear Request.) If the
Reset Retry Count
expires, restart and recovery procedures
should be initiated.
DTE Clear Retry Count
is the number of times a Clear Request from the logical DTE will be transmitted. (The
DTE will stop issuing the request on receipt of a Clear Confirmation or Clear Indi-