Cabletron Systems MMAC-Plus 9F116-01, User Manual, Page: 162 / 420

8-20 FRX/FRM 3. 3 User G uide, Rev 04
Configuring LLC2 Hosts
Each SNA/LLC2 host device that will connect to an FRX/FRM running LLC2 must
be configured in the database.
To display any LLC2 hosts already configured for this node, press [C] at the Configure
LAN Default Parameters Menu (or [A], [A], [E], [C] from the Main Menu). This will list
the hosts' MAC addresses and identify each LLC2 session as Originated or Terminated .
(In an Originated session, the host initiates LLC2 sessions; in a Terminated session,
the host accepts sessions destined for the address.)
A host-to-terminal connection is always initiated by the terminal.
To configure a host, press [D] at the Configure LAN Default Parameters Menu. When
prompted, enter:
●
Host Number: 0–128 . (Default is 0 .)
●
Any other requested information (if this is a new host), noting Table 8-4 (on
page 8-22).The resulting display will depend on the configured session type:
Figure 8-6 = Originated, Figure 8-7 = Terminated.
Figure 8-6 LLC2 Originated Host Configuration Screen
[A],[A],[E],[D] from Main Menu
Pressing
[M]
will display a screen similar to Figure 8-8.
Nod e Name=nod exyz
SN A LLC2 Originated Sess ion Con figu ration (Screen 1 of 2)
* Host Nu mber: 1
A Host MAC Add ress 0C005A 123402
B S es sion Type Originated
C T1 (100 ms ec) 10
D T2 (msec) 100
E Ti 30
F N 3 1
G Tw 1
H N 2 8
I Priority 0
J Ban dwidth A llocation Grou p 1
K R outing Sub scriber ID 1121000000*
L S ource MA C A ddress Mask 40000470
M C onnection s - Screen 2
Option: