Cabletron Systems MMAC-Plus 9F116-01, User Manual, Page: 140 / 420

7-22 FRX/FRM 3. 3 User G uide, Rev 04
Testing a Translation Template
Press
[C]
at the X.25 Address Translation Templates Menu (
[A], [C], [D], [C]
from the
Main Menu) or
[D]
at the Operations Menu (
[B], [D]
from the Main Menu) to test a
translation template you have created.
When prompted, enter:
●
LP.
●
Port.
●
Direction:
I
(incoming) or
O
(outgoing). (Default is
I
.)
●
Called address to be translated.
●
Calling address to be translated.
●
Facility fa user data. (The user data includes four bytes for pro-
tocol ID, which must be entered as a hex string.) To specify only user data, at
the above prompt enter
00
for a facility length, nothing for a facility, then the
desired user data, including the 4-byte protocol ID.
After you enter this information, the FRX/FRM creates a test packet and sends it
through the translation process, and displays the results, as shown in the following
example.
Figure 7-9 Address Translation Test Screen
[B], [E]
from Main Menu
N ode Name=n odexyz
Packet Trans lation Tes t
LP:0 Port:0
D irection:I ncomin g
Original Packet:10010B7712345673333333000100000035353535
C alled Add ress :1234567
Callin g Ad dres s:3333333
U ser Data Protocol ID :01000000Us er D ata: 55555
Facilities:
Trans lation Template:
Template I D:1234C*U *
C alled Add ress :L8401X7
Callin g Ad dres s:P
U ser Data Protocol ID : P Us er D ata: P
Facilities:P
Trans lated Pack et:10010B74840133333330000100000035353535
C alled Add ress :8401
Callin g Ad dres s:3333333
U ser Data Protocol ID : 01000000Us er Data: 55555
Facilities:
S trike any k ey to continu e