Cabletron Systems MMAC-Plus 9F116-01, User Manual, Page: 44 / 420

2-6 FRX/FRM 3. 3 User G uide, Rev 04
A Review X.25 Address Translation Templates
B Configure X.25 Address Translation Templates
C Test X.25 Address Translation Templates
E Configure Logical Ports
– (Chapter 6) specifies operating parameters
for logical ports residing on physical frame relay ports.
F Configure LAN Interfaces
A
Review IP Interfaces
– (Chapter 11) displays information on any
IP interfaces (see below) configured in the FRX/FRM.
B Configure IP Interfaces
– (Chapter 11) specifies addressing and
operating parameters for IP interfaces (X.25, frame relay, or LAN).
C Review Bridge Ports/LLC2 Interfaces
– (Chapter 8, Chapter 13)
displays information on any bridge or LLC2 interfaces (see below)
configured in the FRX/FRM.
D Configure Bridge Ports/LLC2 Interfaces
– (Chapter 8,
Chapter 13) specifies location, type, and format of any bridge or
LLC2 interfaces.
E Review IPX Interfaces
– (Chapter 12) displays information on
any IPX interfaces (see below) configured in the FRX/FRM.
F Configure IPX Interfaces
– (Chapter 12) identifies any IPX
interfaces. Identifies type (X.25, Ethernet, etc.) and operating
parameters.
G Configure BSC Devices
(Chapter 9)
A Review BSC Device Configuration
– displays information on any
BSC Interactive devices (see below) configured in the FRX/FRM.
B Configure BSC Devices
– identifies devices using FRX/FRM ports
configured as BSC Interactive.
D Configure Connections and Routing Paths
A
Review Subscriber IDs
– (misc. chapters) displays information on
any subscriber IDs (see below) configured in the FRX/FRM.
B Configure Subscriber IDs
– (Appendix A and misc. chapters)
identifies end users of the FRX/FRM, and specifies parameters for
redirecting traffic to other ports.
C Review Abbreviated Addresses
– (Chapter 10) displays information
on any abbreviated addresses (see below) configured in the FRX/FRM.
D Configure Abbreviated Addresses
– (Chapter 10) specifies short
versions of subscriber IDs that can be used in place of the full
addresses for async PAD subscribers.
E PVC Configuration
– (Chapter 6, Chapter 7, Chapter 10, Chapter 11)
displays/specifies "permanent" connections between FRX/FRM ports.
A Review PVC Configuration
B Configure PVCs
F Review IP Routing – (Chapter 11) displays information on any IP
routes (see below) configured in the FRX/FRM.
G Configure IP Routing – (Chapter 11) defines routes for IP traffic
through the FRX/FRM.
H Review IPX Routing – (Chapter 12) displays information on any IPX
routes (see below) configured in the FRX/FRM.
I Configure IPX Routing – (Chapter 12) defines routes for IPX traffic
through the FRX/FRM.
E Configure Reports
A
Create Configuration Report – (Chapter 2) produces a summary of
database records in the FRX/FRM, including parameters and values.