Cabletron Systems MMAC-Plus 9F116-01, User Manual, Page: 262 / 420

13-16 FRX/FRM 3. 3 User G uide, Rev 04
DLCI
matches the connection with an interface at the remote end of the link.
Make sure the DLCI is not part of a frame relay DLCI backup
group. (See Chapter 7.) Also make sure that the DLCI is dif-
ferent than the one configured for the physical port in the frame
relay PVC record.
Format
is the RFC1490 encapsulation method used for bridged traffic. Note that specifying
8023_TB will add an Ethernet header to the frame, and 8025_SRB will add a Token
Ring header.
Bandwidth Allocation Group
assigns the interface to one of sixteen groups whose parameters regulate bandwidth
usage. See "Configuring Bandwidth Allocation Groups" on page 6-6.
Host MAC Address
is the MAC address of the LLC2 host in the node.
Session Type
if
Originated
, means that LLC2 connections from the configured
Host MAC Address
can use this interface. If
Terminated
, connections to the configured address can use this
interface.