Cabletron Systems MMAC-Plus 9F116-01, User Manual, Page: 177 / 420

Configuring BSC 9-3
Figure 9-2 BSC Interactive Port Record, Screen 3
Del
(item H) lets you delete the remote subscriber that is currently
highlighted. You will be prompted:
Delete "n,"
where
"n"
is the
sequence number. Pressing
[Y]
will delete that line and move all entries
below it up one sequence number.
A BSC TPAD subscriber can specify only one remote device, which can be an HPAD
or an X.25 connection to the host. An HPAD subscriber can specify up to 16 remote
devices, any of which can be a TPAD or an X.25 connection to the host. Each con-
nection must be assigned a different local subscriber address.
You must also configure Device records for the attached BSC devices. See
"Configuring BSC Interactive Devices" on page 9-19.
BSC Interactive Port Parameters
Table 9-1 BSC Interactive Port Parameters
Parameter Valid Values Default Value
Por t Type BSC-I (not valid here)
Physi cal Port Interface see explanation see explanation
Bl ocked Port Flag Y/ N N
Li ne Speed see explanation 9600
Retr ansmi ssi on Peri od (ms) 1–9999 2000
Maximum Retransmi ssi ons 1–99 5
Maximum Bytes per Frame 25–4105 4105
continued on next page
Node N ame= nodexyz
BSC In teractive S ubs criber In formation
*
RLP: 0 Port: 5 Link S tate: Link up
* I /O:–V.35
A BC D E F G H
Sq Local Su b.R emote Sub .A tcl Rtytm Rty# C onnI DDel
01 100101000000000200201000000000N 60 0 10
02 100101000000001211020100000000N 60 0 12
03 100101000000002212202010000000N 60 0 13
04 100101000000003203301000000000N 60 0 05
05 100101000000004231020100000000N 60 0 08
Select