Cabletron Systems MMAC-Plus 9F116-01, User Manual, Page: 235 / 420

Configuring IPX 12-7
04
= SAP packet
05
= SPX (Sequenced Packet Exchange) packet
11
= NCP (NetWare Core Protocol) packet
14
= Propagated packet, used for NetBIOS (an IBM protocol that performs
transport- and session-layer tasks)
Destination Network Value
is the network number of the destination node's network. The internetwork address is
the network number followed by the socket number.
Destination Node Value
is the physical address of the destination node. The node's internetwork address is the
network number followed by the node address followed by the socket number.
Destination Socket Value
is the socket address of the packet's destination process.
Source Network Value
is the network number of the source node's network.
Source Node Value
is the physical address of the source node.
Source Socket Value
is the socket address of the packet's source process.
Filter Name
helps the user identify the filter. The name is not used by the software.
Router Address Value
identifies the router to which the filter will apply.
Table 12-5 IPX RIP Router Filter Parameters
Parameter Valid Values Default Value
Fi lter Name 1–31 characters none
Router Address Value 0–ffffffffffff (6 bytes) 000000000000
Router Address Mask 0–ffffffffffff (6 bytes) 00000000