Cabletron Systems MMAC-Plus 9F116-01, User Manual, Page: 211 / 420

Configuring Async Ports 10-15
Configuring Subscriber Addresses
This operation creates records for the called and calling addresses that will be used in
call setup. To complete the connection, the software must recognize where the call is
coming from (calling address) and where it is going (called address).
To display a list of current Subscriber IDs (addresses), press [A] at the Connections and
Routing Paths Menu (or [A], [D], [A] from the Main Menu).
To add or change a Subscriber record, press [B] at the Connections and Routing Paths
Menu. When prompted, enter a Subscriber ID of up to 15 digits. (ID conventions are
described in Appendix A.
Figure 10-3 Typical SVC Subscriber Screen
[A],[D],[B] from Main Menu
Pressing
[G]
will display routing paths, which link the subscriber with one or more
ports. Pressing
[H]
will display the addresses used for call redirection. (These
addresses are valid only if
Y
is specified for one or more of items C, D, and E on the
first screen.) Parameters for all three screens are described following Table 10-4.
Nod e Name=n odexyz
S VC Sub scriber Maintenance
*
Sub scriber ID 0100012345
A Sub scriber Name su b1
B Routing Algorithm 0, Rou nd Robin
C Systematic Redirection N
D Redirect on Bus y N
E Redirect on Out of Ord er N
F Conn ection Priority 0
G Routing Path s
H Redirection Ad dres ses
Option: