Cabletron Systems MMAC-Plus 9F116-01, User Manual, Page: 260 / 420

13-14 FRX/FRM 3. 3 User G uide, Rev 04
Bridge Port Parameters
The following table lists parameters for all interface types. Explanations of some
parameters follow the table.
1
Determined by line speed of frame relay port.
2
Make sure the port is not configured (in the Port record) for backup use only. (See
Chapter 6.)
3
Make sure the DLCI is not part of a frame relay DLCI backup group. (See Chapter 6.)
Also make sure the DLCI is not the one configured on the port as a frame relay PVC.
4
If Nati ve LLC2 , the interface can be used only for terminated LLC2 traffic.
5
Configured in LLC2 Host file (described earlier in this chapter).
6
Must be unique among all LAN IDs throughout the network on which this node will
operate.
Interface Type
identifies whether the interface is on a LAN or a frame relay network.
Blocked Port Flag
causes the port to be enabled ( N ) or disabled ( Y ) at node IPL. The interface will remain
in that state until this parameter is changed and an on-line update of the bridge port is
performed.
Table 13-8 Bridge Port/LLC2 Interface Parameters
Parameter Valid Values Default Value
Interface Type Ethernet, TokenRing, FRL
FRL
(frame relay)
Blocked Port Flag Y/N N
Port Priority:
Native LLC2 format: n/a
All other formats:
0–128
128
Path Cost:
Native LLC2 format: n/a
All other formats: 1/1000
LAN speed in Mb/s
Lan interface: 62
FR int. see note
1
Pr iority 0–9 0
LAN Card
FRX4000, FRM:
0
FRX6000: 0,1
0
RLP
FRX4000, FRM:
0
FRX6000: 0–7
0
Port 0–7 2 0
DLCI 16–991 3 16
Format
Nati ve LLC2,8025_SRB,
8023_TB 4 Nati ve LLC2
Bandwidth Allocation Group 1–16 1
Host MAC Address
valid host address
5
400000000001
Session Type Originated, Terminated Originated
LAN ID 000–fff (hex)
6
fff