Cabletron Systems MMAC-Plus 9F116-01, User Manual, Page: 63 / 420

Configuring Cards and Protocols 4-5
LAN Interface
Each FRX4000 contains a built-in LAN interface, either Ethernet or Token Ring
(depending on the model). To configure the interface, press
[C]
at the Port Configu-
ration Menu. When prompted for an
Interface Number
, press
[Enter]
(accepting the
default of
0
).
Figure 4-3 LAN Card Configuration Record
[A],[C],[C]
from Main Menu
Item C ( Ring Speed ) will not be displayed if Type is Ethernet .
LAN Interface Parameters
1
Token Ring FRX4000 only.
Locally Admin. MAC Addr
is a MAC address that will override the universally administered MAC address. If all
zeros are specified, the universal address will be used.
Ring Speed
specifies the speed of the ring to which the interface will connect.
Table 4-2 LAN Interface Parameters on FRX4000
Parameter Valid Values Default Value
Locally Admin MAC Addr 000000000000–7ffffffffffff 000000000000
Ri ng Speed 1 4 MBits/ sec
or
16 MBits/ sec 16 MBi ts/sec
N ode Name= nodexyz
LAN Card Configuration
*
In terface Numb er: 0
* Type Tok en Ring
B Locally A dmin MA C A ddr 400000000001
C Ring Speed 16 MBits/sec
Op tion :