Cabletron Systems MMAC-Plus 9F116-01, User Manual, Page: 191 / 420

Configuring BSC 9-17
Subscriber Parameters
1 The software does not verify that the specified LP/port exists. Make sure the specified
LPs and ports are configured in the database, and that they actually exist.
Subscriber Name
identifies the subscriber to the console operator. The FRX/FRM software does not use
this information.
Routing Algorithm
allows creation of a "hunt group" of ports (see example in Appendix B), for the
purpose of routing per a pre-selected algorithm:
0
= Round Robin – selects ports specified cyclicly in numerical order according
to the list of Redirection Addresses. If the selected port is unreachable or con-
gested, the Call Request will be sent to the next port. (If the port becomes
available again, it will be included in its assigned position.)
1
= Alternate Route on Line Failure – selects the first port that is not in a failed
state. If the selected port does not make a connection, the call will be cleared, even
if other ports are available.
2
= Alternate Route on Line Busy – selects the first port that has LCNs available
(is not busy). If the port has failed, the next available port will be selected.
3
= Least LCN with Throughput – selects the line with the minumum loading, cal-
culated by weight and number of LCNs in use on that line. (Each line is assigned
a weight proportional to its throughput within the routing path.)
If use of a routing algorithm is not desired, simply accept the default, and specify only
one routing path.
Table 9-3 SVC Subscriber Parameters
Parameter Valid Values Default Value
Subscriber Name
0–31 characters none
Routing Algorithm 0–3 0
Systematic Redirection Y/ N N
Redirect on Busy Y/ N N
Redirect on Out of O rder Y/ N N
Connecti on Priori ty 0–9 0
1st,2nd,etc. Path Configured Y/ N N
LP
FRX4000, FRM: 0
1
FRX6000: 0–7
1
0
Por t
Physical port: 0–7
1
Logical port: 8–63
1
0
Redirection Address 0, 1,etc.
valid address none