Cabletron Systems MMAC-Plus 9F116-01, User Manual, Page: 390 / 420

E-2 FRX/FRM 3. 3 User G uide, Rev 04
Local NetView Access
The FRX and FRM support a local NetView access function that allows the node
operator to send commands from the node to lines and PUs. This function is only
between the node and lines/PUs—the commands and responses are not transmitted to
NetView.
To display the NetView Access Options Menu, press [H] at the On-Line Node Opera-
tions Menu (or [B], [A], [H] from the Main Menu).
Figure E-1 NetView Access Options Menu
[B],[A],[H] from Main Menu
Commands can be sent individually or via a batch file. You can also create a batch file
made up of commands you send. The supported commands are described later in this
chapter.
The various operations work as follows:
●
To send commands from the keyboard, select
Read From Keyboard
, then enter
the desired command(s). If you want to create a batch file of the commands you
send, specify the desired
Input File Name
, then specify
ON
for
Write To File
. If you
do not want to create a batch file, make sure
Write To File
is
OFF
.
●
To repeat the last command you entered, press
[F]
.
●
To send commands from an existing batch file, specify the desired
Output File
Name
, then select
Read From File
. The commands will be executed one at a time,
and each command after the first one will be executed only after you press
[F2]
.
Nod e Name=nod e_xyz
NetView Access Option Menu
A
I npu t FileName nmvtC md.in
B Outp ut FileN ame nmvtC md.ou t
C Write to File OFF
D R ead From File
E R ead From Keyb oard
F Execute Las t Comman d
Option: