Cabletron Systems MMAC-Plus 9F116-01, User Manual, Page: 378 / 420

C-2 FRX/FRM 3. 3 User G uide, Rev 04
Async Terminal Commands
The following commands can be entered in Command mode. (For a list of commands,
type help [Enter] .)
STAT – Get connection status.
CLR – Clear Connection.
PAR? n1,n2,n3 – Reads value of 1 or more async PAD profile parameters ( n1 =
1st parameter, n2 = 2nd, etc.). Standard parameters (see page 10-3) are 1–22 .
SET? n1:m1,n2:m2,n3:m3 – Sets and reads async PAD profile parameters ( n1 = 1st
parameter, m1 = new value).
PROF – Sets standard set of parameters. CCITT profile 90 is available.
RESET – Reset connection.
INT – Send interrupt packet.
SET n1:m1,n2:m2,n3:m3 – Sets one or more async PAD profile parameters ( n1 =
1st parameter, m1 = new value).
HELP – Provides more information.
? – Same as HELP .
[Gnn], [Z], [Y], [R], [N] – Selection parameters; used to represent facilities in Call
Request packets (unless they are specified in autocall Call Requests):
[Gnn] = CUG (nn is the CUG number)
[Z] = Group Send
[Y] = Priority
[R] = Reverse Charging
[N] = NUI
Port – displays the LP and port number to which you are connected, and the called
and calling addresses.