Cabletron Systems MMAC-Plus 9F116-01, User Manual, Page: 316 / 420

17-22 FRX/FRM 3. 3 User G uide, Rev 04
Displaying the IP Routing Table
To display a list of active IP routes, press [G] at the Protocol Status Displays Menu (or
[C], [F], [G] from the Main Menu). The following will be displayed for each existing
route:
Destination destination IP address.
Gateway IP address of router that provides access to the destination device.
(This corresponds to the
Router parameter in static IP Routes
(described on page 11-8).
Netmask network mask, used during routing to determine the portion of the
address associated with the network.
Point-to-point frame relay IP connections will display a
Netmask of 255.255.255.255 , which is the default Desti-
nation Mask value for static IP routes. (See page 11-8.)
Flags : U = route is operational.
H = route is a Host route.
G = route is via a remote gateway (hop count is greater than 0 ).
S = route is a static route (described on page 11-8).
Interface Name of corresponding IP Interface. (See page 17-24.)
If the screen is filled with information, you will be asked whether you want to display
more.