Cabletron Systems MMAC-Plus 9F116-01, User Manual, Page: 323 / 420

St atus and Statistics Displays 17-29
Configuring LP and Port Statistics Thresholds
For each LP and port statistic, you can specify a threshold that, when crossed, causes
an alarm to be sent to the collecting node.
Press
[A]
at the Statistics Menu. When prompted, enter:
●
Statistic level
:
L
for LP or
P
for Port.
●
LP
:
0
on FRX4000 or FRM,
0–7
on FRX6000.
●
Port
(if requested):
0–7
.
A menu like the following Port Statistics example will be displayed.
Figure 17-13 Port Statistics Configuration Menu
[E],[A]
from Main Menu
Changing a threshold changes the database value. Press [F7] to write the
change to system memory.
A threshold is either a number or a percentage, depending on the statistic. The valid
range for any statistic is
0–65535 (default = 0 ). When the measured value for the sta-
tistic crosses the threshold (in either direction), an alarm is generated.
Nod e Name=n ode_xyz
Port S tatis tics (Thres holds)
LP: 0
Port: 1
Datab ase Sys tem Memory
A Received frames/Sec (*10) 0 0
B Tran smitted frames/Sec (*10) 0 0
C Retran frames/Sec (*10) 0 0
D FC S errors /S ec (*10) 0 0
E Logical rejects/Sec (*10) 0 0
F Tran smit error ratio 0 0
G Receive error ratio 0 0
H % R eceive p ort utilization 0 0
I % Trans mit port u tilization 0 0
Option: