Cabletron Systems MMAC-Plus 9F116-01, User Manual, Page: 244 / 420

12-16 FRX/FRM 3. 3 User G uide, Rev 04
Configuring Static IPX Routes
Routing of IPX traffic is handled dynamically by such protocols as RIP and SAP, as
well as via static routes configured in the FRX/FRM.
To display configured static routes, press [H] at the Connections and Routing Paths
Menu (or [A], [D], [H] from the Main Menu).
To configure a route, press [I] at the Connections and Routing Paths Menu. When
prompted, enter:
●
Type : 0 (RIP) or 1 (SAP). (The default is 0 .)
●
Route/Service Number : 0–65535 . (The default is 0 .). This is simply an identifier.
The display will be similar to the RIP example in the following figure. (A SAP record
will display different parameters.)
Figure 12-5 IPX RIP Route Record
[A],[D], [I ] from Main Menu
1
The highest interface in the IPX Interface file (described earlier in this chapter).
Table 12-11 IPX RIP Static Route Parameters
Parameter Valid Values Default Value
Network 1–fffffffe (4 bytes) 00000001
Hops 0–65535 1
Tr ansport Time 0–65535 1
Router 0–fffffffffffe
(6 bytes)
000000000001
Interface
0–
note
1
0
Nod e Name=nod e_xyz
IPX Rou te Maintenan ce
* Typ e 0–RIP
* R oute N umber 23
A N etw ork A ddress 0000f0ac
B Hops 26
C Trans port Time 30
D R outer 00000000ff34
E I nterface 5
Option::