Bull Cedoc NovaScale R440 E2, User Manual

Page: 181 / 552

Configuring Your Server 4-87
Manual Rebuild
Rebuild can be performed automatically when the failed Hard Disk Drive is replaced in hot-swap mode. However, if the failed
Hard Disk Drive is replaced after turning off the power of the server, Rebuild will not start automatically. Use the Manual
Rebuild feature to recover the virtual drives as described below.
IMPORTANT:
„
To perform rebuild by replacing the Hard Disk Drive in hot-swap mode, be sure to replace the
device while the operating system or WebBIOS is running.
„
You can view the progress of the rebuild process on the Universal RAID Utility screen or click
[Virtual Drive] on the WebBIOS Top Menu.
„
With the progress indication being displayed, the rebuild may be processed at a slow rate. Go
to the WebBIOS Top Menu after making sure the rebuild progress.
„
Click [Home] while the background task such as Consistency Check, Rebuild, or
Reconstruction is being executed. When the progress indication bar is being displayed, the
background task may be processed at a slow rate.