Bull Cedoc NovaScale R440 E2, User Manual

Page: 43 / 552

General Description 2-11
STATUS INDICATORS
This section explains the indication and meanings of the server LEDs.
POWER LED ( )
The POWER LED is on (green) while the server is being powered. It is off while no power is supplied to the server. It flashes
while the server is in standby status.
STATUS LED ( )
The STATUS LED is on (green) while the server is operating normally. If the STATUS LED is off or turns amber and flashes,
it indicates that the server is in abnormal state.
The table below explains the STATUS LED indication, the meanings, and the procedures.
NOTES:
„
If NEC ESMPRO is installed, you can confirm the cause of a failure by referring to the error
log.
„
If shutdown processing can be performed through the operating system when you want to
restart the system after turning the power off, then restart the system by performing shutdown
processing. If shutdown processing cannot be performed, restart the system by resetting,
forcibly turning the power off, or disconnecting and then connecting the power cord.