Bull Cedoc NovaScale R440 E2, User Manual

Page: 391 / 552

Upgrading Your Server 9-37
Notes on Configuring LockStep
In LockStep configurations, the menus related to LockStep in the BIOS SETUP utility are grayed out and unselectable in the
following cases:
„
When you additionally install DIMMs, LockStep is disabled
„
When you remove DIMMs, LockStep is disabled.
In this case, execute [Load Setup Defaults] to cancel the LockStep configuration.
1.
Note down the settings in the BIOS SETUP utility.
2.
Press
F2
during POST to run BIOS SETUP utility.
3.
Select [Exit]
→
[Load Setup Defaults].
4.
When a message "Load default configuration now?" appears, select [Yes].
5.
Enter the parameter values you have noted down in Step 1.
NOTE:
Executing [Load Setup Defaults] restores the default values for all Setup parameters. You
need to specify those parameters again.