manualshive.com logo in svg

Bull Cedoc NovaScale R440 E2, User Manual, Page: 160 / 552

Share
Download
Bull Cedoc NovaScale R440 E2 User Manual Download Page 160

4-66  Configuring Your Server 

Physical Drive Properties   

Locate:   

Let Disk Status lamp light or blinks. 

Make Global HSP:   

The selected Hard Disk Drive is assigned as hot-spare available for all 
DGs. 

Make Dedicated HSP:   

The selected Hard Disk Drive is assigned as hot-spare available only 
for the specific DG. 

Remove HOTSPARE:   

The selected Hard Disk Drive is unassigned from hot-spare and made 
Unconfigured Good state. 

Make Unconf Bad:   

Make the selected Hard Disk Drive in faulty state. This is indicated on 
the Hard Disk Drive of which status is "Unconfigured Good". 

Make Unconf Good   

Make the selected Hard Disk Drive in "Unconfigured Good" state. This 
is indicated on the Hard Disk Drive of which status is "Unconfigured 
Bad". 

Prepare Removal:   

Make the power status of the selected Hard Disk Drive in "Powersave" 
state. 
This is indicated on the Hard Disk Drive of which power status is "On" 
and the status is "Unconfigured Good". 

Undo Removal:   

Make the power status of the selected Hard Disk Drive in "On". 
This is indicated on the Hard Disk Drive of which power status is 
"Powersave". 

Make Dive Offline:   

Make the selected Hard Disk Drive in "Offline" state. 
This is indicated on the Hard Disk Drive of which status is "Online".

 

Make Drive Online:   

Make the selected Hard Disk Drive in "Online" state. 
This is indicated on the Hard Disk Drive of which status is "Offline".

 

Rebuild Drive:   

Start rebuilding VD that contains the selected Hard Disk Drive. 
This is indicated for the Hard Disk Drive of which status is "Offline".

 

Mark as Missing:   

Remove the VD that contains the selected Hard Disk Drive from the DG. 
This is indicated on the Hard Disk Drive of which status is "Offline".

 

 

IMPORTANT:

 The RAID Controller does not support the Events feature. 

 

Summary of Contents for NovaScale R440 E2









































































































































































































































































































































































































































































































































































Reviews:

No comments