Bull Cedoc NovaScale R440 E2, User Manual, Page: 392 / 552

9-38 Upgrading Your Server
PROCESSOR (CPU)
Another CPU may be installed in addition to the standard CPU (Intel
®
Xeon
®
Processor).
IMPORTANT:
„
The CPU is extremely sensitive to static electricity. Make sure to touch the metal frame of the
server to discharge static electricity from your body before handling the CPU. Do not touch the
CPU pins by a bare hand or place the CPU directly on the desk. For static notes, see the section
"Anti-static Measures" described earlier.
„
Do not operate the system until confirming that the additionally installed CPU is operating
normally.
„
Make sure to use the CPU authorized by Bull. Installing a third-party CPU may cause a failure
of the CPU as well as the server. Repair of the server due to failures or damage resulted from
installing such a CPU will be charged.
FRONT
REAR
Mother board
NOTE:
If a different revision of the processor is installed in the multiprocessor system, Windows
logs the following information every startup. If this message is logged, this will not prevent the
server from running.