manualshive.com logo in svg

Bull Cedoc NovaScale R440 E2, User Manual, Page: 222 / 552

Share
Download
Bull Cedoc NovaScale R440 E2 User Manual Download Page 222

5-24    Installing the Operating System with Express Setup 

Network Driver

 

Specify the details of the network driver. 
Two standard network drivers that are mounted will be installed automatically, but the link speed and Duplex mode need to be 

specified manually.

 

1. 

Open the [Device Manager]. 

2. 

Double-click [(Network Adapter Name)] in the list. 

3. 

Click the [Link Speed] and specify the [Speed & Duplex] values ( same as the value specified for HUB). 

4. 

Click [OK]. 

Also, add or delete any protocols and services if necessary. 
You can manage the process from the property dialog box for local area network which cis available in [Network and Dial-up 

Connection].

 

NOTE:

 We recommend you add [Network Monitor] at [Adding Services]. [Network Monitor] 

can monitor the frame (or the packet) that the computer installing [Network Monitor] sends or 

receives. This tool is valuable when analyzing network trouble. For information on how to install 

the tool, see    "Setting for Solving Problems" described later in this chapter. 

 

Optional Network Board Driver 

The following optional network boards are available for the Intel Pro/1000 MT, Pro/1000GT and Pro/1000PT server adapters. 
To use the Intel Pro/1000 PT server Adapter, see" Using Intel Pro/1000 PT server Adapter after System Update" in the previous 

page. 
The drivers for other network boards are automatically installed by Windows Plug-and-Play. You do not need to install them 

manually. 

 

Summary of Contents for NovaScale R440 E2









































































































































































































































































































































































































































































































































































Reviews:

No comments