Bull Cedoc NovaScale R440 E2, User Manual, Page: 471 / 552

Installing Windows Server 2008 D-13
7. At the command prompt, enter user information.
NOTE:
For more detailed procedure, see the "Microsoft Windows Server 2008 Step-By-Step
Guide".
After installations is completed, be sure to execute the tasks described in "Setup of Device Driver (Normally Install in Server)"
and "Updating the System" of this chapter.
<In case not using Onboard RAID controller (LSI Embedded MegaRAID
™
)>
1.
Turn on your system.
IMPORTANT:
To install Windows Server 2008, you may need to update BIOS. To check if your
system needs a BIOS update, go to: www.bull.com .
2.
Insert the Windows Server 2008 DVD-ROM into your DVD-ROM drive.
3.
Restart the system.
To restart the system, press
Ctrl + Alt + Del
or turn off the system once, and then turn it on again.
IMPORTANT:
When prompted to [press any key to boot from CD or DVD], press
Enter
while the
message is displayed. If the Windows installation screen (shown in step 4) does not appear, turn off
the system, and then turn it on again.
The DVD-ROM starts. A message "Windows is loading files …" appears.
4.
Select a language and other options from the drop-down lists, and then click [Next].