Bull Cedoc NovaScale R440 E2, User Manual

Page: 228 / 552

5-30 Installing the Operating System with Express Setup
Installing RAID Controller Driver
The installation procedure depends on your environment.
Follow the steps below according to your environment.
z
If the Internal RAID Controller or LSI Logic SAS CTRL 8708EM2 is used:
You do not need to install the driver manually. It is automatically installed by Windows Plug-and-Play.
z
If the Internal RAID Controller or LSI Logic SAS CTRL 8708EM2 is not used:
Install the driver using the following procedures.
1.
Start [Device Manager] from the [Start] menu → [Administrative Tools] → [Computer Management].
2.
Double-click the "LSI Logic MegaRAID SAS 8880EM2 RAID Controller" which Device Manager lists as "Storage
controllers".
3.
Click [Update Driver].
4.
When the "Update Driver Software- Logic MegaRAID SAS 8880EM2 RAID Controller Wizard" appears, select
"Browse my computer for driver software".
5.
Select "Let me pick from a list of device drivers on my computer".
6.
Click [Have Disk..].
7.
Insert "ExpressBuilder DVD" into the optical disk drive, enter "<drive
letter>:\009\win\winnt\oemfd\ws2008\fd1\megasas" into "Copy manufacturer's files from:" and click [OK].
8.
Specify the following driver and click [Next].
– [LSI Logic MegaRAID SAS 8880EM2 RAID
Controller]
9.
Click [Close].
The installation of the driver is completed.
Restart the system.
Installing Fibre Channel Controller Driver (Emulex LPe1150 / LPe11002)
If you use the Fibre Channel Controller refered above, you do not need to install the driver manually. It is automatically
installed by Windows Plug-and-Play.
Procedure to Set PAE Option
If your 32-bit system has a memory capacity in excess of 4GB, setting PAE option will enable the system to be installed with
over 4GB of memory.
IMPORTANT:
"/PAE option" is not supported on Windows Server 2008 Standard Edition.
In Windows Server 2008 system, the PAE option can be set by using Bcdedit.exe.
The setting procedure is as follows.
1.
Click [Run] from the [Start] menu.
2.
Type "cmd.exe" in the [Open:] box to start command prompt.
3.
Execute the following command line.
bcdedit /set pae forceenable