Bull Cedoc NovaScale R440 E2, User Manual, Page: 304 / 552

7-8 Maintenance
Startup and Exit of System Diagnostics
There are two ways to diagnose the server: to use the local console (keyboard) of the server itself, and to use the management
PC via serial port (remote console).
IMPORTANT:
Two methods of LAN and the serial port are mentioned in "Maintenance Tools" of
Chapter 8 "Troubleshooting" in the way of communicating in remote console.
Use the serial port to execute System Diagnostics with remote console. The LAN connection is not
for System Diagnostics.
Procedures to start the diagnostics program are as follows:
1.
Shutdown the OS, and power off the server. Then, unplug the power cord.
2.
Disconnect all the LAN cables from the server.
3.
Plug the power cord and power on the server.
4.
Use the ExpressBuilder DVD to start the system.
5.
Select [Tool menu (Normal mode)] when local console of the server is used for, or select [Tool menu (Redirection
mode)] when remote console is used for.
NOTE:
If the system displays the [Language selection] menu, select [English].