Bull Cedoc NovaScale R440 E2, User Manual, Page: 261 / 552

Installing the Operating System with Express Setup 5-63
4.
Specify "Complete memory dump" and modify [Dump file:] in the [Write debugging information] group box.
e.g. Write the debug information in D drive write the file name "MEMORY.DMP".
D:\MEMORY.DMP
5.
Click [Settings] on the [Performance] group box.
The [Performance Options] window appears.
6.
Click the [Advanced] tab on the [Performance Options] window.
7.
Click [Change] on the [Virtual memory] group box.
8.
Modify [Initial Size] in the [Paging file size for selected drive] box to the value larger than the value of
[Recommended] in the [Total paging file size for all drives], and click [Set].
IMPORTANT:
„
The above-mentioned paging file size is recommended for collecting debug information
(memory dump). A paging file with an initial size large enough to store the dump file in the
boot drive is required.
Correct debug information might not be able to be collected due to virtual memory shortage
when the paging file is insufficient, so set a paging file size large enough for the entire
system.
„
For more information on "Recommended" values, see "About the System Partition Size"
described earlier.
„
If the memory is expanded, re-specify the paging file to suit the new memory size.
9.
Click [OK].
The message to restart the system may appear according to the modified specification. In such case, restart the
system.