manualshive.com logo in svg

Bull Cedoc NovaScale R440 E2, User Manual, Page: 192 / 552

Share
Download
Bull Cedoc NovaScale R440 E2 User Manual Download Page 192

4-98  Configuring Your Server 

WebBIOS and the Universal RAID Utility 

You can use the Universal RAID Utility for configuring, managing and monitoring RAID System when the operating system is 

running. 
Please keep in mind when using the Universal RAID Utility together with WebBIOS: . 
 

Terms 

Terms used in WebBIOS differ from those used in the Universal RAID Utility. 
When you use the Universal RAID Utility together with WebBIOS, substitute terms according to the following list. 

Term in WebBIOS 

Term in the Universal RAID Utility 

Adapter RAID 

Controller 

Virtual Drive 

Logical Drive 

Drive Group 

Disk Array 

Physical Drive 

Physical Device 

 

Number and ID 

Numbering of each component of a RAID System used in the Universal RAID Utility differs from the one used in WebBIOS. 

 

Adapter and RAID Controller 

WebBIOS identifies the Adapter starting from 0. You can see the Adapter number using [Adapter No] in the [Adapter 

Selection] menu. 
The Universal RAID Utility identifies the RAID Controller starting from 1. You can see the RAID Controller number using 

[Number] in the RAID Controller properties on the RAID Viewer or using [RAID Controller #X] in the RAID Controller 

properties on the raidcmd command. 
Also, you can see the number of the Adapter managed by WebBIOS using [ID] in the RAID Controller properties by the 

Universal RAID Utility.

 

Virtual Drive and Logical Drive 

WebBIOS identifies the Virtual Disk starting from 0. You can see a number of Virtual Disk using [VD X] in Virtual Drives. 
The Universal RAID Utility identifies the Logical Drive starting from 1. You can see the Logical Drive number using 

[Number] in the Logical Drive properties on the RAID Viewer or using [RAID Controller #X Logical Drive #Y] in the Logical 

Drive properties on the raidcmd command. 
You can also see the Logical Drive number managed by WebBIOS where [ID] in the property of Logical Drive by Universal 

RAID Utility.

 

Disk Array 

WebBIOS identifies a Disk Array starting from 0. You can see a number of Disk Array using [DG X] in Physical Drives and 

Virtual Drives. 
The Universal RAID Utility identifies Disk Array starting from 1. You can see a number of Disk Array using [Disk Array] in 

the Logical Drive properties on the RAID Viewer or [RAID Controller #X Disk Array #Y] in the Disk Array properties on the 

raidcmd command. 
 

Physical Drive and Physical Device 

WebBIOS identifies Physical Drive with two numbers (Slot number and Connector number, starting with 0). You can view 

these numbers shown by [x:x:x] in the Physical Drives box. You can view these numbers in the Physical Drives properties. 
The Universal RAID Utility identifies Physical Device with a number starting with 1 and ID, Enclosure number, and Slot 

number. The numbers of Hard Disk Drives connected to the controller are sorted in ascending order based on ID. The ID has 

the same value than the Slot number shown in WebBIOS. Enclosure number and Slot number are assigned with a number 

Summary of Contents for NovaScale R440 E2









































































































































































































































































































































































































































































































































































Reviews:

No comments