Buffalo TeraStation User Manual Download Page 102

Page: 102 / 160

TeraStation User Manual

101

After the synchronization is complete, you can open offline files even after disconnecting from the network that

the TeraStation is on. Offline files can be accessed through the UNC to the original location.

Note:

If offline files are available, the icon is displayed in the systray.

* Editing Offline Files

Offline files can be edited or deleted just like regular files. Differences between data in different locations will be

resolved by re-synchronization when the network connection is re-established.

* Synchronizing Offline Files

Offline files are automatically synchronized when you log on or off the network.
* Version Conflicts

Conflicts occur when the offline and original files are both modified differently before they are re-synchronized. If

conflicts occur, the following wizard opens. Step through the wizard to resolve the conflicts.

You’ve configured offline files.

Summary of Contents for TeraStation

































































































































































Search results

Summary of Contents for TeraStation

Reviews:

Related manuals for TeraStation

Brands by name

Popular brands

Buffalo TeraStation, User Manual

Search results

Summary of Contents for TeraStation

Reviews:

Related manuals for TeraStation

Brands by name

Popular brands