Buffalo TeraStation User Manual Download Page 105

Page: 105 / 160

TeraStation User Manual

104

FTP Server

By default, the TeraStation’s shares are only accessible by users connected to the same network or router as the

TeraStation. The optional FTP server allows users to access the TeraStation from outside of the local network. You may

enable it as follows.

Click

Shared Folders

Folder Setup

The folder is now configured for FTP access. Do not forget to give read (or write) permissions for the FTP share to any

users that will be accessing the share remotely. Folder permissions can only be changed from Settings. Changing them

remotely with FTP client software is not supported.

In Settings, navigate to

Network

Settings

Network

Services

and click

FTP

Select whether the shared folder is to be

Read Only

Read & Write

Check

Ftp

Click

Save

Click the folder to enable remote FTP access on.

Select

Enable

Click

Save

Summary of Contents for TeraStation

































































































































































Search results

Summary of Contents for TeraStation

Reviews:

Buffalo TeraStation, User Manual, Page: 105 / 160

Search results

Summary of Contents for TeraStation

Reviews: