Buffalo TeraStation User Manual Download Page 82

Page: 82 / 160

TeraStation User Manual

Chapter 9
Extensions

Using WebAccess

WebAccess lets you access files on your TeraStation through the Internet. Access restrictions can be set for folders that

are shared, and automatic router settings by UPnP and redirect functionality from the buffalonas.com server (similar to

Dynamic DNS) make configuration easy.

Note:

Care should be taken with configuration of WebAccess. Certain settings can make the files in the shared folder available

to anyone on the Internet without any access restrictions.

Use compatibility mode to use WebAccess with Windows 8.

For more information on WebAccess, visit http://buffalonas.com/manual/setup/en/

TeraStation

Office

Internet

Both uploading and
downloading are supported.

Central Server

Remote location 1

Create and save documents from a remote
location.

Download photos and video from remote
locations.

Remote location 2

What is WebAccess ?

Summary of Contents for TeraStation

































































































































































Search results

Summary of Contents for TeraStation

Reviews:

Buffalo TeraStation, User Manual, Page: 82 / 160

Search results

Summary of Contents for TeraStation

Reviews: